| Single skin partitioning is an ideal solution where a high quality, economical partitioning arrangement is required for manufacturing and storage areas. |
|
 |
| Panels are constructed from 43 x 43 x 1.2mm (18g) cold rolled angles and 32 x 32 x 0.7mm (22g) cold rolled tee bars with 0.8mm (21g) CR4 mild steel or 50mm x 50mm x 3mm (10g) weldmesh sheets spot welded into the framework. |
|
| SINGLE SKIN PARTITIONING |
|
INTERIOR VIEW |
|
| 1 |
Wall Channel |
 |
| 2 |
Standard All-Solid Panel |
| 3 |
Standard All-Glass Panel |
| 4 |
Corner Section (Angle or Mullion) |
| 5 |
Standard Half-Glazed Panel |
| 6 |
Three Way Section (Angle or Mullion) |
| 7 |
Standard Door Module Half-Glazed |
| 8 |
Standard Solid/Glass/Solid Panel |
| 9 |
Intermediate (Two-Way) Mullion |
| 10 |
Make-up Panel |
| 11 |
Standard All-Mesh Panel |
| 12 |
Standard Half Steel/Half Mesh Panel |
| 13 |
Top Capping Channel |
| |
|
|
| |
STANDARD PANEL SIZES |
 |
| |
| Height |
2400, 2700, 3000mm |
| Width |
1000mm |
| Dado height |
1200mm |
| Thickness |
43mm |
| A range of infill and special size panels can be supplied to maintain final dimensions. |
|
|
|
| |
MULLION SIZES |
|
| |
50mm x 50mm x 2mm
[up to 2700mm high] |
80mm x 40mm x 2.5mm
[2700mm & above] |
100mm x 50mm x 3mm
[to suit installation] |
| All two-way (intermediate) mullions have base plates for floor fixing. Knee braces and/or ladder mullions may be fitted for extra stability and strength eg. on clear access doors. |
|
|
|
| |
STANDARD DOOR MODULE SIZES |
|
| |
steel or timber |
|
| |
| |
Height |
Width |
Side
Hung |
2022mm
plus overpanel to partition height
|
1000mm
|
| Double Doors |
2022mm
plus overpanel to partition height |
1940mm
|
| Sliding Doors |
sizes to suit customer's requirements |
| Doors can be supplied with or without vision panels. A full range of non-standard door types, i.e. full height leaves, clear access modules or hospital type leaves are available to order. |
|
|
|
| |
GLAZING |
|
| |
A two piece plastic glazing system that can accommodate 4 mm to 7 mm glass, is supplied in 1828 mm and 2440 mm lengths to be cut and fitted on site. 6 mm toughened, 6.4 mm laminated and 6 mm Pyroshield are supplied as standard. However, other types of glass and Perspex may also be fitted as required. |
|
|
|
|
| |
PAINT FINISH |
|
| |
All panels are electrostatically powder coated in the following standard colours:-
Grey 10 A 07, Grey 00 A 05,
Sandstone 08 B 17 and Stone 10 B 17.
Special colours (over 100 in stock) are available at extra cost . |
|
|
| |
ACCESSORIES |
|
| |
A comprehensive range of accessories, including drop-down and sliding hatches, louvres, vents and locking systems are available to order. |
|
|
